化工进展 ›› 2019, Vol. 38 ›› Issue (06): 2756-2767.DOI: 10.16085/j.issn.1000-6613.2018-1645

• 工业催化 • 上一篇    下一篇

氧化亚铜光催化剂性能提升及增强机制的研究进展

龙丹(),周俊伶,时洪民,王冠然,李红双,赵苾艺,李贞玉()   

  1. 长春工业大学化学工程学院,吉林 长春 130012
  • 收稿日期:2018-08-10 出版日期:2019-06-05 发布日期:2019-06-05
  • 通讯作者: 李贞玉
  • 作者简介:龙丹(1993—),女,硕士研究生,研究方向为功能材料。E-mail:<email>danlong175201@163.com</email>。
  • 基金资助:
    吉林省自然科学基金(20160101322JC);吉林省教育厅“十三五”科学技术研究项目(2016350)

Research progress on the improved performance of cuprous oxide photocatalyst and its enhancement mechanism

Dan LONG(),Junling ZHOU,Hongmin SHI,Guanran WANG,Hongshuang LI,Biyi ZHAO,Zhenyu LI()   

  1. School of Chemical Engineering,Changchun University of Technology,Changchun 130012,Jilin,China
  • Received:2018-08-10 Online:2019-06-05 Published:2019-06-05
  • Contact: Zhenyu LI

摘要:

Cu2O是目前最有潜力的可见光光催化剂之一,在太阳能电池、一氧化碳氧化、光催化剂、传感器、化学模板等方面有着广泛的应用。然而,Cu2O光生电子-空穴对具有容易复合、易发生光腐蚀、稳定性不好等特性,使其在实际应用上面临很大的挑战,因此如何有效地提高Cu2O的光催化性能成为国内外研究者关注的焦点。首先,本文围绕Cu2O半导体的形貌控制、杂原子掺杂以及构建半导体异质结这三方面对Cu2O光催化性能的提升进行系统阐述,其中构建半导体异质结是提升Cu2O光催化性能最有效的方法,Cu2O与贵金属、金属氧化物以及碳材料构成的复合半导体异质结均有效地提高了Cu2O的光催化活性;其次,从复合半导体异质结、肖特基结以及Z-scheme机制三方面分析并讨论了Cu2O光催化增强机制;最后对Cu2O基纳米复合材料在电子结构、界面性质以及表面负载的成分和厚度等方面的研究进行了展望。

关键词: 氧化亚铜, 光化学, 催化, 形貌控制, 杂原子掺杂, 半导体异质结, 优化

Abstract:

As one of the most promising visible light photocatalysts, Cu2O has potential applications in many multidisciplinary fields such as solar cells, carbon monoxide oxidation, photocatalysts, sensors, chemical templates. However, due to the easy recombination of its photo-generated electron-hole, quick photocorrosion and poor stability, Cu2O still faces great challenges in its practical application. Therefore, the studies in the improvement of the photocatalytic performance of Cu2O has gained extensive attentions. Firstly, three improvement methods of morphology control, heteroatom doping, and semiconductor heterojunction are introduced. It is concluded that the construction of semiconductor heterojunction is the most effective method to improve the photocatalytic performance of Cu2O and the heterostructures with noble metal, metal oxides, and carbon material are preferred. Secondly, the photocatalytic enhancement mechanism of Cu2O was discussed with respect to the composited semiconductor heterojunction, Schottky junction and Z-scheme mechanism. Finally, the research directions of Cu2O-based nanocomposites, which contains electronic structure, interface properties, and composition and thickness of surface loads are given.

Key words: cuprous oxide, photochemistry, catalysis, morphology control, heteroatom doping, semiconductor heterojunction, optimization

中图分类号: 

京ICP备12046843号-2;京公网安备 11010102001994号
版权所有 © 《化工进展》编辑部
地址:北京市东城区青年湖南街13号 邮编:100011
电子信箱:hgjz@cip.com.cn
本系统由北京玛格泰克科技发展有限公司设计开发 技术支持:support@magtech.com.cn